Tips and Tricks When Applying Furniture Transfers

  • Remove the white backing before you start rubbing it on. It seems simple but many of us have gotten so excited and forgot

  • Be careful after pulling the transfer out of the tube, and take the tape off gently.
  • It's been rolled up tight for a while; we recommend you lay it flat, and put some books on each end, so it doesn't naturally want to roll back.
  • These transfers stick quickly and cannot be moved; Make sure they are in the right place before you remove the backing and place it down.

  • Wait at least 24 hours after painting to apply the transfer; or read the paint manufacturers details on how long it takes to dry completely.

  • Make sure the piece is clean. No dust, nor oils as it will stick to the glue on the transfer making it impossible to then stick to your project.

  • Always seal your transfers after they are on your projects. It is fine to seal with a water-based wax or a water-based poly. Rubbing wax on will not hurt your transfers.

  • Glass windows or mirrors do not need to be sealed. You can wash the glass with water and a damp micro-fiber cloth made for glass. Do not use chemicals to wash the glass.

  • Make sure your transfers are stored at all times in the tube with the lids on so they cannot get dusty.